 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| 05217 EM8Q-100 Only One Name Means ProT ek'TionTM LCD - EMI FIL TER/TVS ARRA Y APPLICA TIONS LCD Displays Cellular Phones Notebooks Personal Digital Assistant (PDA) Ground Positioning System (GPS) SMART Cards IEC COMPA TIBILITY (EN61000-4) 61000-4-2 (ESD): Air - 15kV, Contact - 8kV 61000-4-4 (EFT): 40A - 5/50ns FEA TURES ESD Protection > 25 kilovolts Bidirectional EMI Filtering/TVS Low Pass Filters Low Insertion Loss: -3db Roll-Off @ 150MHz Protects Up to Eight(8) Data Lines RoHS Compliant on Lead-Free Versions MECHANICAL CHARACTERISTICS QFN-16 Package Weight 0.73 milligrams (Approximate) Available in Tin-Lead or Lead-Free Pure-Tin Plating(Annealed) Solder Reflow Temperature: Tin-Lead - Sn/Pb, 85/15: 240-245C Pure-Tin - Sn, 100: 260-270C Flammability rating UL 94V-0 Marking: Logo, Part Number and Pin One Defined By Dot on Package L3 L4 L5 L6 16 15 14 13 12 L2 L1 34 L1 L2 L7 L8 L8 L7 12 11 10 9 QFN-16 5678 L3 L4 L5 L6 16 PIN QFN PACKAGE 3mm X 3mm PIN CONFIGURA TION I/O 1 Pin 2 D1 I/O 2 Pin 1 I/O 3 Pin 16 I/O 4 Pin 15 R1 D2 R2 R3 R4 Pin 3 I/O 5 I/O 6 Pin 4 I/O 7 Pin 5 I/O 8 Pin 6 Pin 14 D1 Pin 13 Pin 12 Pin 11 R5 D2 R6 R7 R8 Pin 7 Pin 8 Pin 9 Pin 10 Note: Center Tab as the Ground. 05217.R3 6/05 1 www.protekdevices.com EM8Q-100 DEVICE CHARACTERISTICS MAXIMUM RATINGS @ 25C Unless Otherwise Specified PARAMETER Operating Temperature Storage Temperature DC Power Per Resistor Typical Resistance @ 15% Soldering Temperature for 10 seconds SYMBOL TJ TSTG P R TL VALUE -40C to 85C -55C to 150C 100 100 265 C UNITS C C mW OHMS C ELECTRICAL CHARACTERISTICS PER LINE @ 25C Unless Otherwise Specified PART NUMBER RATED MINIMUM STAND-OFF BREAKDOWN VOLTAGE VOLTAGE MAXIMUM REVERSE LEAKAGE CURRENT @ 3V ID A 0.1 TYPICAL FORWARD VOLTAGE MINIMUM ATTENUATION CUT-OFF TYPICAL FREQUENCY CAPACITANCE (50 Ohms I/O PER LINE ZERO BIAS) (See Note 1) @2.5V, 1 MHz C pF 20 VWM VOLTS EM8Q-100 Note 1: 20% tolerance. @ 1mA V(BR) VOLTS 6.0 @10mA VF VOLTS 0.8 @ 800-3000 MHz dB 25 fc MHz 150 5.0 05217.R3 6/05 2 www.protekdevices.com EM8Q-100 GRAPHS FIGURE 1 TYPICAL INSERTION LOSS (TA = 25C, DC BIAS = 0V, 50OHM ENVIRONMENT) 0 -5 -10 -15 -20 -25 -30 -35 0.1 Insertion Loss - (dB) 1 10 100 1000 10000 Frequency (MHz) 1.100 FIGURE 2 RESISTANCE VS TEMPERATURE (Normalized to Resistance at 25C) Normalized Resistance 1.060 1.020 0.980 0.940 0.900 -40 -20 0 20 40 Temperature C 60 80 100 05217.R3 6/05 3 www.protekdevices.com EM8Q-100 PACKAGE OUTLINE & DIMENSIONS PACKAGE OUTLINE C Pin 1 Identified by Dot E D F PACKAGE DIMENSIONS DIM A B C D E F G H I MILLIMETERS 3.000 SQ 1.550 SQ 0.050 1.500 0.500 BSC 0.230 0.05 0.400 0.05 0.750 0.05 0.000 - 0.05 0.203 0.025 INCHES 0.1181 SQ 0.0610 SQ 0.002 0.059 0.0196 BSC 0.009 0.002 0.0157 0.002 0.0295 0.002 0.000 - 0.002 0.0079 0.001 A B Chamfer 0.300 x 45 G C L TOP VIEW H SIDE VIEW I NOTES: 1. Controlling dimensions in inches. 2. Decimal tolerances for mounting pad and outline: .xxx 0.05mm ( 0.002"). TAPE & REEL ORDERING NOMENCLATURE 1. Surface mount product is taped and reeled in accordance with EIA 481. 2. Suffix-T7 = 7 Inch Reels - 3,000 pieces per 12mm tape, i.e., EM8Q-100-T7. 3. Suffix-T13 = 13 Inch Reels - 5,000 pieces per 12mm tape, i.e., EM8Q-100-T13. 4. Suffix-LF = Pure Tin Plating,i.e, EM8Q-100-LF-T7. 1 MOUNTING PAD TYPICAL DIM Millimeters 1 2 3 4 5 4.000 0.700 1.000 0.500 0.300 Inches 0.1574 0.0275 0.0393 0.0196 0.0118 2 3 5 4 Outline & Dimensions: Rev 0 - 7/04, 06054 Tape & Reel Specifications (Dimensions in millimeters) Reel Dia. 178mm (7")/330mm(13") Tape Width 12mm A0 B0 K0 D E F W P0 P2 P tmax 0.25 3.30 0.10 3.30 0.10 1.00 0.10 1.50 0.10 1.75 0.10 5.50 0.10 12.00 0.30 4.00 0.10 2.00 0.05 8.00 0.10 P0 t D P2 10 Pitches Cumulative Tolerance on Tape. 0.2 E Top cover tape A0 K0 B0 Pin 1 Indicated by Dot F W P User Direction of Feed COPYRIGHT (c) ProTek Devices 2005 SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice (except JEDEC). DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice, and that the final judgement concerning selection and specifications is the buyer's and that in furnishing engineering and technical assistance, ProTek assumes no responsibility with respect to the selection or specifications of such products. ProTek Devices 2929 South Fair Lane, Tempe, AZ 85282 Tel: 602-431-8101 Fax: 602-431-2288 E-Mail: sales@protekdevices.com Web Site: www.protekdevices.com 05217.R3 6/05 4 www.protekdevices.com |
Price & Availability of EM8Q100
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |